Concrete Mixing Method for concrete mixers

Concrete Mixing Method for concrete mixers should be understood. In describing the mixing process, the mixer hardware is only one of several components. The mixing process also includes the loading method, the discharge method, the mixing time, and the mixing energy.

drum-mixer.jpg

Concrete mixing method - Loading, Mixing, and Discharging for concrete mixer
The loading method includes the order of loading the constituents into the mixer and also the duration of the loading period. The duration of this period depends on how long the constituents are mixed dry before the addition of water and how fast the constituents are loaded. The loading period is extended from the time when the first constituent is introduced in the mixer to when all the constituents are in the mixer. RILEM divides the loading period into two parts: dry mixing and wet mixing (Fig. 1). Dry mixing is the mixing that occurs during loading but before water is introduced. Wet mixing is the mixing after or while water is being introduced, but still during loading. This means that materials are introduced any time during the loading period: all before the water, all after the water, partially before and partially after. Fig. 1. Mixing schedule.
The loading period is important because some of the concrete properties will depend on the order in which the constituents are introduced in the mixer. It is well known that the delayed addition of high range water reducer admixture (HRWRA) leads to a better dispersion of the cement. The same workability can be thus be achieved with a lower dosage of HRWRA [7]. Unfortunately, there is no systematic study, to our knowledge, that has examined the influence of the order of constituent loading on concrete properties. Most operators rely on experience and trial and error to determine the loading order of their mixer.
Very often, the mixing time is defined as the time elapsed between the loading of the first constituent to the final discharge of the concrete. RILEM took another approach defining mixing time as the time between the loading of all constituents and the beginning of concrete discharge (see Fig. 1). It should be noted that solid constituents can be added at various stages of the loading period: during dry mixing, after water is added, after a second period of mixing (third slope in Fig. 1). Both definitions are acceptable. In any case, it is important that the mixing process be described fully for each batch of concrete.
The discharge from the mixer should be arranged so that it increases productivity (fast discharge), and it does not modify (slow discharge) the homogeneity of the concrete. For instance, if the discharge involves a sudden change in velocity—as in falling a long distance onto a rigid surface—there could be a separation of the constituents by size or, in other words, segregation.

Mixing Energy
The energy needed to mix a concrete batch is determined by the product of the power consumed during a mixing cycle and the duration of the cycle. It is often considered, inappropriately, a good indicator of the effectiveness of the mixer. The reason that it is not a good indicator is because of the high dependence of the power consumed on the type of mixture, the batch size and the loading method. For example, a mixer that has a powerful motor could be used to mix less workable or higher viscosity concretes. The mixing energy could be similar to that of a less powerful mixer but one filled with a more workable concrete

Concrete Mixing Method relates concrete manufacturing process, you can learn more information about concrete mixers in our website.

Inquiry

Simply complete the form below, click submit, you will get the price list and a DASION representative will contact you within one business day. Please also feel free to contact us by email or phone. ( * Denotes a required field).

Service Online >

Related product